Home > Products > Sludge Dryer > Modular Design Sludge Dryer
Modular Design Sludge Dryer
In the process of sludge drying, the dry hot air is used as the drying medium, so that the moisture in the sludge with higher moisture content is going through an energy exchange with the dry hot air. The air after the exchange becomes moist worm air, which is converted into dry hot air once more through the evaporation system and condensation system in the heat pump dehumidification system, and continues to circulate energy exchange, while the condensed water is discharged into the sewage tank.Online Inquiry
SLUDGE LOW-TEMPERATURE DESICCATION EQUIPMENT
Low Temperature Sludge Dryer – Dewatering & Drying Combined Set
(1) 1 : 4.2
1 kWh electricity alone is capable to remove as much as 4.2 kgs of water from wet sludge, comparing to normal 1-2.5 kg of water per kWh. Save energy bill and reduce carbon footprint.
(2) 67% / 80%
Reduce wet sludge volume by 67% and weight by 80%. Save transportation cost.
(3) 75ºC / 50ºC
Control processing temperature under 75ºC with outlet dried sludge temperature below 50ºC. Intrinsic safe and no explosion worries.
(4) 0 / 90%
Zero odor emission and sterilization rate higher than 90%. Eco-friendly.
(5) 99% - 10%
Reduce Sludge Moisture from 99% to 10% in one Combined Set. Simpler operation.
- Previous: Waste-heat Sludge Dryer
- Next:No Next